Add Yaesu FTM-510DR support via microSD (#151)

README.md

@@ -29,6 +29,7 @@ including programming several different radios from the same codeplug.
 | **AnyTone AT-D578UV** | DMR + Analog mobile | 2 m / 1.25 m / 70 cm | Direct USB — channels, zones, scan lists, talkgroups, settings, call-sign DB | 4000 channels in 250 zones; 264 menu settings including the FM and DMR APRS setup; 500k-entry caller-ID database. AM channels in 108–136 MHz go to the air-band memory, which only the D578UV **PLUS** receives — that part is written to the published map but has not been checked on a PLUS. Same protocol as the D890UV over a different memory map |
 | **Yaesu FT5D** | C4FM (System Fusion) + Analog | VHF / UHF TX, wideband RX | microSD — patches the radio's own backup file | 900 channels in 24 banks; channels, banks, and menu settings |
 | **Yaesu FTM-300DR** | C4FM (System Fusion) + Analog | 2 m / 70 cm TX, 108–999 MHz RX | microSD — patches the radio's own backup file | 999 memories; memories and 147 menu settings, including the APRS and SmartBeaconing setup |
+| **Yaesu FTM-510DR** | C4FM (System Fusion) + Analog | 2 m / 70 cm TX, 108–550 MHz RX | microSD — patches the radio's own backup file | 999 memories; memories and 284 settings — Setup Menu items, band skip, DTMF memories, and the APRS setup down to digi paths, message texts and status texts |
 | **Icom ID-52** | D-STAR + Analog | VHF / UHF TX, 108–174 / 225–479 MHz RX | microSD — patches the radio's own `.icf` file | 1000 memories in 100 groups; memories and menu settings restore in one operation |
 | **Icom ID-5100** | D-STAR + Analog | 2 m / 70 cm TX, 118–174 / 375–550 MHz RX | Data cable — read, write, settings | 1000 memories in 26 named banks, programmed by Icom's clone protocol over the cable; 292 menu settings including My Call Sign, TX messages and the D-PRS (APRS) position, object, item and weather setup, written in the same upload as the memories |
 | **Kenwood TH-D72** | APRS + Analog | 2 m / 70 cm TX, 118–174 / 320–524 MHz RX | Direct USB — read, write, settings | 1000 memories; 113 menu settings over the radio's own `MU` command |

src-tauri/src/commands/program.rs

@@ -520,6 +520,7 @@ pub async fn find_memory_cards(format: String) -> Vec<MemoryCard> {
         "icom_id52_icf" => id52_cards(),
         "kenwood_thd75_sd" => thd75_cards(),
         "yaesu_ftm300_sd" => ftm300_cards(),
+        "yaesu_ftm510_sd" => ftm510_cards(),
         _ => Vec::new(),
     })
     .await
@@ -570,6 +571,28 @@ fn ftm300_cards() -> Vec<MemoryCard> {
     out
 }
 
+/// The FTM-510 is the FTM-300's arrangement under its own folder and name:
+/// Setup Menu 107 BACKUP → WRITE TO SD → ALL writes this path, READ FROM SD
+/// → ALL loads it back.
+fn ftm510_cards() -> Vec<MemoryCard> {
+    let mut out = Vec::new();
+    for root in mounted_roots() {
+        let path = root.join("FTM510D").join("BACKUP").join("CLNFTM510D.dat");
+        let Ok(image) = std::fs::read(&path) else {
+            continue;
+        };
+        if crate::radios::yaesu_ftm510::sd_image::validate_backup(&image).is_err() {
+            continue;
+        }
+        out.push(MemoryCard {
+            has_original: path.with_extension("dat.orig").exists(),
+            volume: volume_name(&root),
+            path: path.to_string_lossy().into_owned(),
+        });
+    }
+    out
+}
+
 /// The ID-52 keeps its settings files in one fixed folder but names them
 /// itself, so what gets offered is the **folder**, not a file: the write creates
 /// a new `SetYYYYMMDD_NN.icf` in it rather than overwriting anything the
@@ -704,6 +727,31 @@ pub async fn read_ftm300_settings_from_backup(path: String) -> Result<RadioSetti
     .estr()?
 }
 
+/// The FTM-510's version of [`read_ftm300_settings_from_backup`], reading the
+/// `CLNFTM510D.dat` the radio writes with Setup Menu 107 BACKUP → WRITE TO SD →
+/// ALL.
+#[tauri::command]
+pub async fn read_ftm510_settings_from_backup(path: String) -> Result<RadioSettingsRead, String> {
+    tauri::async_runtime::spawn_blocking(move || {
+        let image = std::fs::read(&path).map_err(|e| {
+            format!(
+                "Could not read {path}: {e}. Pick FTM510D/BACKUP/CLNFTM510D.dat from the \
+                 radio's microSD card."
+            )
+        })?;
+        crate::radios::yaesu_ftm510::sd_image::validate_backup(&image)?;
+        let settings = crate::radios::yaesu_ftm510::settings::decode_settings(&image);
+        let count = settings.as_object().map(|o| o.len()).unwrap_or(0);
+        Ok(RadioSettingsRead {
+            settings,
+            count,
+            backup_path: path,
+        })
+    })
+    .await
+    .estr()?
+}
+
 /// The ID-52's version of [`read_ft5d_settings_from_backup`], reading the `.icf`
 /// the radio writes with `SET > SD Card > Save Setting`.
 ///

src-tauri/src/db.rs

@@ -61,7 +61,7 @@ mod tests {
         // original set): currently the Baofeng UV-5R, TIDRADIO TD-H3, AnyTone
         // AT-D890UV and AT-D578UV, Yaesu FT5D, Icom ID-52, Kenwood TH-D75, Kenwood TH-D72
         // the Binteradio BT-9000, Kenwood TM-D710, Icom ID-5100, TYT MD-380 and Yaesu
-        // FTM-300DR. (0015
+        // FTM-300DR and FTM-510DR. (0015
         // removed the Vero VR-N76 placeholder.) None of the last five has a
         // migration of its own — seeding INSERTs new (manufacturer, model)
         // rows, so a new model reaches existing databases on the next startup
@@ -71,9 +71,9 @@ mod tests {
             .await
             .unwrap();
         assert_eq!(
-            count.0, 13,
+            count.0, 14,
             "expected the UV-5R, TD-H3, AT-D890UV, AT-D578UV, FT5D, ID-52, TH-D75, TH-D72, BT-9000, \
-             TM-D710, ID-5100, MD-380 and FTM-300DR seeded models"
+             TM-D710, ID-5100, MD-380, FTM-300DR and FTM-510DR seeded models"
         );
 
         let models: Vec<(String,)> =
@@ -85,7 +85,7 @@ mod tests {
         assert_eq!(
             names,
             vec![
-                "AT-D578UV", "AT-D890UV", "BT-9000", "FT5D", "FTM-300DR", "ID-5100", "ID-52",
+                "AT-D578UV", "AT-D890UV", "BT-9000", "FT5D", "FTM-300DR", "FTM-510DR", "ID-5100", "ID-52",
                 "MD-380", "TD-H3", "TH-D72", "TH-D75", "TM-D710", "UV-5R"
             ]
         );
@@ -96,7 +96,7 @@ mod tests {
             .fetch_one(&pool)
             .await
             .unwrap();
-        assert_eq!(count2.0, 13, "seeding should be idempotent");
+        assert_eq!(count2.0, 14, "seeding should be idempotent");
 
         // A new database starts with NO talkgroups. The BrandMeister list used
         // to be compiled in and seeded here; it is downloaded on request now,