Pick a profile. See exactly what changes. Apply it, and undo it with one command.
A single-file Windows tool that tunes network privacy and performance settings, safely.
Features · Profiles · Quick start · Safety · Help us test · Roadmap · Contributing
NetShutUp is the network-focused cousin of tools like O&O ShutUp10. You choose a profile — Privacy, Performance or Recommended — and the program shows you every registry value, service and DNS setting it would touch, asks for confirmation, saves a backup, applies the change and checks the result.
It exists because "network optimization" tips on the internet are a mixed bag: some help, some do nothing, some quietly make things worse. NetShutUp only includes tweaks whose registry path, default value and effect were checked against Microsoft's documentation, and it leaves out the folklore (for example the "disable auto-tuning" and QoS-bandwidth tricks).
Warning
Pre-alpha. The code that changes settings has been tested with unit tests and a registry sandbox, but it has not yet been proven on a range of real computers. Start with preview and --dry-run, and read Help us test if you want to try it for real.
- Read-only first.
scanandpreviewshow the current state and the planned changes without touching anything and without administrator rights. - Backup before every change. The previous value of every touched setting is saved and verified on disk before the first write. A setting that was not set is restored as not set, not as zero.
- One-command undo.
revertputs everything back from the backup; a failed write rolls back everything done so far. - Encrypted DNS that proves itself. The profile points your adapters at a DNS provider with DNS-over-HTTPS required, then checks with real lookups that it works. If it does not work on your network, the next provider is tried, and if nothing works your old DNS is restored. You are never left without internet.
- Interactive menu. Double-click the
.exefor an arrow-key menu; or use plain commands in a terminal or script. - Self-test mode. One menu entry runs every profile for real, undoes it, verifies that the computer is back exactly as it was, and writes a masked report you can attach to an issue.
- One file. No installer, no extra DLLs, no background service, nothing sent over the network.
| Profile | For | What it does |
|---|---|---|
| Privacy | Less telemetry, fewer leaks | Disables the telemetry service, sets the diagnostic-data policy to the lowest level, turns off LLMNR name broadcasts and peer-to-peer update sharing, and moves DNS to Quad9 with DoH. It may also ask four optional firewall questions, each answered No by default. |
| Performance | Games and real-time apps | Turns off delayed ACK per adapter, removes the multimedia network-throttling limit, turns off peer-to-peer update sharing, and picks the faster of Cloudflare and Google DNS (DoH) by measuring. |
| Recommended | Everyday use | Turns off LLMNR and peer-to-peer update sharing and moves DNS to Cloudflare (then Google) with DoH. Safe, widely useful, nothing that gets in the way. |
Every profile also makes sure Windows Firewall is on and blocks inbound connections by default (your existing allow rules keep working). On most computers that is already the case, so this changes nothing there. If another firewall is registered with Windows (for example an antivirus suite), these settings are skipped and the preview says so.
The Privacy profile can also ask about four optional firewall items, one question each, default No: a rule that stops the telemetry service connecting out (the program removes it again on revert), and turning off the network discovery, file and printer sharing and Remote Assistance rules on Public networks (these can stop sharing, printers or remote help on public Wi-Fi). A question is asked only when the item would change something, and none are asked when another firewall is registered.
The Home edition of Windows treats telemetry level 0 as the lowest allowed level, not "off". NetShutUp says so instead of claiming otherwise. Details and the tweaks that were deliberately left out are in
docs/design/2026-11-16-alpha-release.md.
Testers: download the zip of the 0.1.0-alpha.1 pre-release from the Releases page (check the .sha256; the .exe is not code-signed, so SmartScreen may warn). Or build from source (a few minutes, Rust required):
git clone https://github.com/imardagokce/NetShutUp.git
cd NetShutUp/modern
cargo build --releaseThen run target\release\netshutup-modern.exe, or from a terminal:
netshutup-modern Open the menu
netshutup-modern scan Show the current network settings
netshutup-modern preview <profile> Show what a profile would change
netshutup-modern apply <profile> Apply a profile (asks first, saves a backup)
netshutup-modern apply <profile> --dry-run
Go through apply without changing anything
netshutup-modern revert Undo the most recent apply
netshutup-modern selftest Test every profile for real and write a report
apply, revert and selftest need administrator rights; the program asks for them through the normal Windows prompt, and only when you run one of those. Full usage notes: modern/README.md.
| Windows 10 / 11 | Everything except encrypted DNS works on both. Encrypted DNS needs Windows 11 (build 22000+); on Windows 10 the DNS step is skipped and your DNS is not touched. |
| Windows 7 / 8 / 8.1 | Not supported by this line. A separate Legacy line (C++, independent codebase) is in development on the legacy branch and is waiting for testing on real Windows 7/8/8.1 machines. |
The rules the code is built around (and tests enforce):
- Nothing changes before you have seen a preview and confirmed it.
- A verified backup exists before the first change.
- A failure halfway undoes the changes made so far.
- After a profile that changes DNS, internet access is checked; if it does not work, DNS is put back as it was.
- Settings are only written for physical Ethernet and Wi-Fi adapters; virtual adapters, VPNs and tunnels are left alone.
- Nothing leaves your computer.
- The self-test exports the relevant registry keys and creates a System Restore point before it changes anything, and writes any problem into its report.
Real-world testing is the most valuable thing right now, and you do not need to be a developer.
Step-by-step guide: docs/TESTING.md (Türkçe: docs/TESTING.tr.md).
In short: download the latest release, run it, choose Self-test (for testers), confirm, accept the administrator prompt. It applies each profile, checks it, undoes it, and writes a report (no user name, computer name, Wi-Fi name or full IP/MAC addresses). Then open a test report and attach both files.
What the self-test report contains
Windows version and edition, processor and memory, computer make and model, network adapter hardware and drivers, how many VPN or virtual adapters exist, whether the computer is on a domain or has DNS/telemetry policies, the names of registered antivirus/firewall products, whether a proxy is set, and what every test did and how long it took. Addresses are masked; nothing is uploaded.
Found a security problem? Please use the private route described in SECURITY.md instead of a public issue.
- Windows version detection, adapter enumeration, settings catalog and read-only scan
- Backup, apply and revert engine with rollback
- Three built-in profiles with preview and dry-run
- Interactive terminal menu
- DNS provider with encrypted DNS (DoH), real-lookup trial and automatic fallback
- Self-test mode with a masked report
- DNS-over-TLS as a second encrypted DNS method (experimental, tried when DoH does not work)
- Windows Firewall base tier for all profiles (on, inbound blocked by default; skipped when another firewall is registered)
- Windows Firewall strict tier (Privacy profile: four optional items, each asked separately, default No)
- First alpha release (
0.1.0-alpha.1) with a prebuilt.exe(published as a pre-release; the strict firewall tier is onmainonly until the next build) - Advanced mode: switch individual settings on and off
- Graphical interface
modern/ Rust application for Windows 10/11 (this branch, main)
docs/ Design notes, roadmap and compatibility matrix
legacy Separate branch for Windows 7/8/8.1 (independent C++ codebase, in development, awaiting testing)
Testers and contributors are welcome. Start with the Contributing & testing guide: it explains step by step how to test safely, how to send a report, and how to work on the code (small, tested changes; conventional commits). Dependency security alerts are watched by Dependabot.
NetShutUp is free software under the GNU General Public License v3.0. Forks must remain open source. See LICENSE.