Repository navigation
Add Missing Q10 Feature support #767
Description
This issue is an omnibus of all the missing features from Q10 devices.
Higher Priority
- Map (multi-map, restricted zones, virtual walls, room management)
- Cleaning history
- Battery
- Cleaning mode
- Fan level
Lower Priority
- Basic vacuum control (start, pause, resume, stop, dock)
- Empty dustbin
- Consumable status (main brush, side brush, filter, rag life)
- Consumable Resets
- Mop state
- Carpet Cleaning Settings (carpet clean prefer, auto boost, carpet clean type)
- Floor Material / Ground Clean settings
- Robot voice volume
- DnD (Do Not Disturb)
- Valley Point Charging (Off peak)
- Child lock
- Button lights
- Remote Control
- Timers
- Unit settings (area unit, time zone)
- Clean line preference
- Self-identifying carpet
- Obstacle avoidance settings
Activity
TangerineNightmare commentedon Apr 23, 2026
for what it is worth there is a new open source project at https://codeberg.org/zcodeberg/roborock-q10-utils-gpl that implements a subset of the Q10v+ mobile app functionality as a self-hostable python web interface. It includes some API information that may or may not be of use?
https://codeberg.org/zcodeberg/roborock-q10-utils-gpl/src/branch/main/Q10_API_REFERENCE.md
hCoureau commentedon Aug 31, 2026
Q10 map and cleaning contribution stack
Tracking the current contribution sequence here so each change can remain small and independently reviewable:
The stack is deliberately sequential so each upstream PR shows only its own logical diff against
main.tprommi commentedon Oct 11, 2026
Environment: Home Assistant Core 2026.9.4, python-roborock 7.12.0, Roborock Q10 S5 (ss07), firmware 03.11.26.
I’m using a Roborock Q10 S5 with three saved maps for the basement, ground floor, and upper floor. Home Assistant currently receives the room segments for the active map with numeric room IDs only. When I switch maps and configure the area mapping again, the mappings for the other floors are replaced. The same room IDs can refer to different rooms on different maps. For example, on my ground-floor map, segment 1 is “Corridor” and segment 3 is “Kitchen”, while those IDs were previously mapped to other areas.
Could the Q10 API expose the map ID together with the room segments for all saved maps? Home Assistant could then use stable segment IDs containing both the map ID and room ID, preserving area mappings across floors and avoiding incorrect room cleaning after a map switch.
One additional observation: the Roborock app shows six rooms on my ground-floor map, but Home Assistant receives seven segments and reports “Relax” twice (IDs 4 and 7).