Rebuild AM2R for ARM64 Android or Linux from your own original Windows AM2R 1.1 ZIP. Standard plays on one screen. Dual Screen puts gameplay above the interactive map on supported two-screen devices.
AM2ARM is based on AM2R Community Updates 1.5.5. The title screen displays the port version V1.6.2.
| Platform | Download |
|---|---|
| ARM64 Android | AM2ARM-Autopatcher-1.6.2.apk |
| Supported ARM64 Linux handhelds | AM2ARM-Autopatcher-1.6.2-linux-arm64.zip |
Keep your original 2016 AM2R_11.zip zipped. Each Autopatcher reconstructs and verifies the selected edition locally. The Linux installer works offline with physical buttons. A touchscreen is needed for the Dual Screen map.
- One Linux download covers supported Ports, stock TrimUI, NextUI and spruceOS setups. The firmware menu starts the same installer and patch data.
- Miyoo Flip V2 (RK3566 / MY355) has a working Standard display path. TrimUI Smart Pro S (TG5050) has its own 1280 × 720 profile for its firmware's SDL2 and Mali graphics libraries. An on-device check is pending for Smart Pro S.
- The GameMaker source for both editions and platforms is now in the repository alongside the Autopatcher and native display code. The development guide explains how to restore the omitted assets.
The Autopatcher requires Android 10 or newer on an ARM64 device.
- Put your original
AM2R_11.zipin Downloads or another folder the system file picker can access. - Install AM2ARM Autopatcher. Allow installation from your browser or file manager when Android asks.
- Open it, select Standard or Dual Screen, then select your ZIP. Wait for reconstruction and verification.
- The generated game APK is saved in Downloads. Choose Install Standard or Install Dual Screen, allowing the patcher to install it when asked.
- Open AM2ARM or AM2ARM DS directly. The game no longer needs the Autopatcher to run. Dual Screen asks for a hardware profile on first boot.
For Retroid Pocket Nova + Dual Screen Add-on, select the Retroid Pocket Duo / Duo Lite profile and enable Dual Screen Add-on. Leave that option off on ordinary Duo/Duo Lite devices. RG DS has its own screen-order option; use the order that places gameplay above the map.
To update, back up your saves, install the new Autopatcher, reconstruct the edition you use and install its generated APK over the existing game. Updating only the patcher does not update the game. Do not uninstall the old game: uninstalling deletes its private saves. Package IDs and signing are preserved.
Check compatibility and leave at least 3 GB free on the game card after copying. The same Linux ZIP serves every setup in this table.
-
Extract AM2ARM-Autopatcher-1.6.2-linux-arm64.zip on your computer.
-
A. Card reader — power off the handheld and open its game-data card on the computer. B. USB transfer — if the firmware offers file transfer, leave the card in the handheld and copy through its data port. Close the installer and game while copying. USB transfer options
-
Copy the files to the location for your firmware.
Handheld menu What to copy Ports on RG DS or G350 ROCKNIX Open the existing Ports directory. Put the extracted AM2ARM/ folder and ports/AM2ARM Autopatcher.sh beside each other inside it. ROCKNIX commonly uses games-internal/roms/portson its system card orroms/portson a games card.Apps on stock TrimUI Merge AM2ARM/ and Apps/ into the game-card root. Tools on NextUI Merge AM2ARM/ and Tools/ into the game-card root. Apps on spruceOS Merge AM2ARM/ and App/ (singular) into the game-card root. Ports on Miyoo Flip V2 / MY355 Copy AM2ARM/ to the game-card root. Copy the included Roms/ports/ launcher into the existing Ports directory, keeping the card's capitalization. For a Tools frontend use the included Tools/my355/ entry. -
Put your own AM2R_11.zip in AM2ARM/patcher/input/. Safely eject the card or leave USB transfer mode before starting.
-
Open AM2ARM Autopatcher in the menu above. Choose your ZIP and select INSTALL. Use the D-pad, Confirm and Back. Keep the default installation folder on a fresh install. FOLDER → [USE THIS FOLDER] selects a different destination. Direct-display handhelds offer Standard.
-
Exit after INSTALLATION COMPLETE, then open AM2ARM Standard or AM2ARM Dual Screen in the same menu. If the game is missing on ROCKNIX, open Start → Game Settings → Update Gamelists.
USB access depends on both the handheld and its firmware. An OTG label alone does not guarantee PC file transfer. Use a data cable and the correct data port; copying uses the same folders as a card reader.
- ROCKNIX: open Network Settings, enable Samba or SSH, choose USB Gadget
Function Network, then exit settings to apply it. Connect by USB and
access the
games-romsshare or use SFTP at the address shown by the device. This needs no Wi-Fi. File Transfer is another option where supported. See the ROCKNIX transfer guide. - NextUI: NextUI Dashboard provides
browser-based USB/ADB uploads in Chrome or Edge. Connect the powered-on Brick,
select it in the browser's connection prompt, then use File Browser to
upload the extracted folders under
/mnt/SDCARD/, preserving their paths. The original game ZIP stays zipped. The Brick needs no Wi-Fi; the PC needs access to the Dashboard website. See its instructions. - Other firmware: use its documented USB file-transfer mode. If it supports an external USB drive through OTG and has a file manager, copying from that drive to the card is another route. Otherwise use a card reader.
On the G350, USB networking was verified with ROCKNIX.
Before updating a game, export your progress through Options → Data → Back Up Saves. Close the game and back up its state. On Ports, install into an empty destination that your menu can see. Keep its matching launcher with the game folder and restore your backup if needed. On TrimUI, merge the new AM2ARM/ and menu folders and rebuild Standard. An existing installation is preserved.
For startup problems, copy AM2ARM/logs/compatibility.txt from the card. On Ports the installer also writes AM2ARM/patcher/compatibility.txt and logs under AM2ARM/patcher/state/. Include your model, firmware and the last screen you saw. Keep your original ZIP, full game and saves private.
| Platform | Device / setup | Verified scope |
|---|---|---|
| Android | AYN Thor | Standard and Dual Screen |
| Android | AYANEO Pocket DS; Retroid Pocket Duo and Duo Lite | Community-tested Dual Screen |
| Android | Original RG DS, stock Android / GammaOS | Dual Screen; demanding scenes can slow down |
| Android | Retroid Pocket Nova + Retroid Dual Screen Add-on | Community-tested with the Retroid profile |
| Linux | Original RG DS, stock Linux 1.1-261008 | Fresh installation, Standard and Dual Screen, controls, sound, touch and Standard vibration |
| Linux | RG DS, ROCKNIX 20261101 | Installer and Standard; Dual Screen on this firmware unverified |
| Linux | BATLEXP G350, ROCKNIX | Installer, Standard, save transfer and aspect-ratio checks |
| Linux | TrimUI Brick, NextUI 20261013-0 | Installer, Standard startup/gameplay, full-screen display, music output and printed A/B/X/Y mapping |
| Linux | TrimUI Brick, stock menu 1.0.6 | Fresh-card installation, fullscreen gameplay, music, controls and damage vibration |
| Linux | Miyoo Flip V2, RK3566 / MY355, BaseOS 1.3.0 | Standard confirmed by a community tester |
TrimUI Smart Pro S uses a separate TG5050 profile. Its 1280 × 720 installer layout and the graphics libraries in TrimUI firmware 1.0.1 have been checked. A physical launch on the tester's spruceOS installation is pending. The original Smart Pro has a separate TG5040 profile and also awaits hardware confirmation. Brick Pro and the 32-bit Miyoo Mini Flip use different hardware.
The stock Brick check used the stock menu on a Brick with a CrossMix 1.3.9 marker. Damage vibration was verified there. A physical NextUI vibration check is still pending. Previous RG DS, G350 and Brick checks are listed above for their tested firmware and features.
The Ports route uses the firmware's existing Wayland session. The supported direct-display profiles use the handheld's own graphics libraries. Keep the device's graphics drivers and firmware in place. Stock G350 BATLEXPOS is outside the supported setups in this release. R36S, RG DS Plus and newer ARM64 RG35XX variants still need their own firmware checks. The original Cortex-A9 RG35XX runs 32-bit ARM and cannot run this ARM64 package.
Standard provides gameplay on a single screen. Android supports touch and controllers; Linux uses physical controls. Aspect Ratio offers 4:3 / 16:9 / 3:2 without stretching. During play, a change applies at the next room transition.
Android Standard's Touch Control Scale, Control Spacing and Diagonal Aim Size are independent. Enlarging diagonal arrows shrinks the joystick inside the same overall area, and the touch targets follow the graphics.
Dual Screen puts gameplay above and the map/HUD below. Map buttons, dragging and pinch zoom use touch; Samus uses the controller. HUD Screen Position can move health and ammunition to the gameplay screen. A single foldable/tablet canvas split into two panels is not supported.
Nano, in Display Options, reduces selected decorative effects to help slower hardware. It is optional and does not guarantee 60 FPS everywhere. Android launchers running behind the lower display, including some Cocoon setups, can affect performance. The lower screen may take a moment to resume after switching apps.
Use Options → Data → Back Up Saves to create a portable backup. Copy that entire folder to the other device, then choose Data → Restore Saves from the title/file-selection options. This works with Android exports and PC Community Updates 1.5.5 saves. Restore is unavailable during active gameplay. Choose the source and destination slot; unlock records are a separate choice.
Android uses its system folder picker. Linux uses a controller-operated picker:
Confirm opens a folder, Back cancels, Left/Right move by a page, and USE THIS
FOLDER selects it. Backup creates a new folder instead of replacing an old
one. Restore validates files and keeps replaced progress in pre-restore-backup.
Keep the filenames save1, save2, save3, data.sav and extras.sav.
Do not copy portable exports directly over raw Linux saves; use Restore.
Ports keeps raw saves in state/config/AM2RStandardLinux/ or
state/config/AM2RDualLinux/ inside the installed game. Stock TrimUI uses the
game's state directory and keeps its previous save location on an update.
NextUI uses the firmware's home directory, usually
.userdata/tg5040/.config/AM2RStandardLinux/ on Brick. On spruceOS and
direct-display Ports the preset location is
AM2ARM/state/home/.config/AM2RStandardLinux/. Close the game before copying
raw state and keep config.ini separate between platforms.
Choose Data → Sync Folder in each Android edition and synchronize that folder with your own file-sync app. Wait for transfers before switching devices. AM2ARM exports completed saves and checks incoming progress at file selection; Sync Now checks on demand. It does not sign into a cloud account or perform network transfers itself. Linux uses manual Backup/Restore, not automatic sync.
Keep the am2r-sync-*.zip files and AM2R-Sync-Recovery folder together. Do not
rename or merge their contents. Conflicts are held for Review Sync Conflict
at the title menu; missing shared slots do not delete local progress. Disable
Sync leaves saves intact. Use separate folders for independent playthroughs.
The desktop game does not read these sync ZIPs; use portable backups with it.
The repository contains the Standard and Dual Screen GameMaker projects for Android and Linux, the Autopatcher source, and the native Linux integration. Original media and signing material are omitted. Use your own original AM2R 1.1 ZIP to restore the missing inputs locally. The development guide lists the matching restore files, toolchain and build steps. Development guide
Report a problem with the exact
model, firmware/OS, edition, Nano setting and steps to reproduce it. For Linux
startup failures include compatibility.txt and relevant state logs. Review logs
for personal paths before sharing. Do not attach the original ZIP or a complete
game package. Reports from stronger devices also help with compatibility.
AM2R and Community Updates retain their original credits. This is a community port, not a Nintendo release. LICENSE covers the patcher code; game source and dependencies retain their respective notices and licenses. The patcher's MIT license does not relicense original game material.