All issues

Search results

I installed cosmos and now cc1 just doesnt power on.

Status: Open.

#365 In OpenCentauri/cosmos;

· bruceprattebp-code opened on Sep 28, 2026

End gcode for ORCA

Status: Open.

#364 In OpenCentauri/cosmos;

· Notjohnsnow opened on Sep 27, 2026

Incorrect command string in COSMOS calibration instructions

Status: Open.

#363 In OpenCentauri/cosmos;

· Notjohnsnow opened on Sep 27, 2026

CC2 macros need to be updated

Status: Open.

#361 In OpenCentauri/cosmos;

· jamesturton opened on Sep 27, 2026

CC2 stepper drivers need to be tuned

Status: Open.

#359 In OpenCentauri/cosmos;

· jamesturton opened on Sep 27, 2026

Spoolman connection race condition during Moonraker startup

Status: Open.

#357 In OpenCentauri/cosmos;

· Vampiro1 opened on Sep 27, 2026

Resume after power failure??

Status: Open.

#348 In OpenCentauri/cosmos;

· peepsnet opened on Sep 25, 2026

RESUME fails with "Extrude below minimum temp" when PRINT_START was not used

Status: Open.

#324 In OpenCentauri/cosmos;

· Tanguille opened on Sep 11, 2026

Orca Upload and Print fails on Cosmos: 'Unable to open file' (works via Mainsail and on OC patched)

Status: Open.

#269 In OpenCentauri/cosmos;

· pdscomp opened on Jul 25, 2026

Support DHCP Option 42 (NTP Servers) for Chrony

Status: Open.

#268 In OpenCentauri/cosmos;

· rodripr1 opened on Jul 23, 2026

[CC1] RTL8821CU rtw88 post-bind USB control transfers fail with -EPROTO

Status: Open.

#264 In OpenCentauri/cosmos;

· pdscomp opened on Jul 21, 2026

[CC1] RTL8821CU fails USB enumeration with -EPROTO after warm reboot

Status: Open.

#263 In OpenCentauri/cosmos;

· pdscomp opened on Jul 21, 2026