取值范围[1, 100], 同时需大于ImageGCLowThresholdPercent取值。控制台展示为imageGCHighThresholdPercent + */ + @UCloudParam("ImageGCHighThresholdPercent") + private Integer imageGCHighThresholdPercent; + + /** + * 配置镜像的磁盘用量百分比阈值，镜像用量低于此阈值时不会执行镜像垃圾收集操作。 取值范围[1, 100], + * 同时需小于imageGCHighThresholdPercent取值。控制台展示为imageGCLowThresholdPercent + */ + @UCloudParam("ImageGCLowThresholdPercent") + private Integer imageGCLowThresholdPercent; + + /** Node能运行的Pod最大数量。需大于0。控制台展示为maxPods */ + @UCloudParam("MaxPods") + private Integer maxPods; + + /** */ + @UCloudParam("EvictionHard") + private KubeletConfigurationEvictionHard evictionHard; + + /** */ + @UCloudParam("EvictionSoft") + private KubeletConfigurationEvictionSoft evictionSoft; + + /** */ + @UCloudParam("EvictionSoftGracePeriod") + private KubeletConfigurationEvictionSoftGracePeriod evictionSoftGracePeriod; + + /** */ + @UCloudParam("KubeReserved") + private KubeletConfigurationKubeReserved kubeReserved; + + /** */ + @UCloudParam("SystemReserved") + private KubeletConfigurationSystemReserved systemReserved; + + public Integer getContainerLogMaxFiles() { + return containerLogMaxFiles; + } + + public void setContainerLogMaxFiles(Integer containerLogMaxFiles) { + this.containerLogMaxFiles = containerLogMaxFiles; + } + + public String getContainerLogMaxSize() { + return containerLogMaxSize; + } + + public void setContainerLogMaxSize(String containerLogMaxSize) { + this.containerLogMaxSize = containerLogMaxSize; + } + + public Integer getImageGCHighThresholdPercent() { + return imageGCHighThresholdPercent; + } + + public void setImageGCHighThresholdPercent(Integer imageGCHighThresholdPercent) { + this.imageGCHighThresholdPercent = imageGCHighThresholdPercent; + } + + public Integer getImageGCLowThresholdPercent() { + return imageGCLowThresholdPercent; + } + + public void setImageGCLowThresholdPercent(Integer imageGCLowThresholdPercent) { + this.imageGCLowThresholdPercent = imageGCLowThresholdPercent; + } + + public Integer getMaxPods() { + return maxPods; + } + + public void setMaxPods(Integer maxPods) { + this.maxPods = maxPods; + } + + public KubeletConfigurationEvictionHard getEvictionHard() { + return evictionHard; + } + + public void setEvictionHard(KubeletConfigurationEvictionHard evictionHard) { + this.evictionHard = evictionHard; + } + + public KubeletConfigurationEvictionSoft getEvictionSoft() { + return evictionSoft; + } + + public void setEvictionSoft(KubeletConfigurationEvictionSoft evictionSoft) { + this.evictionSoft = evictionSoft; + } + + public KubeletConfigurationEvictionSoftGracePeriod getEvictionSoftGracePeriod() { + return evictionSoftGracePeriod; + } + + public void setEvictionSoftGracePeriod( + KubeletConfigurationEvictionSoftGracePeriod evictionSoftGracePeriod) { + this.evictionSoftGracePeriod = evictionSoftGracePeriod; + } + + public KubeletConfigurationKubeReserved getKubeReserved() { + return kubeReserved; + } + + public void setKubeReserved(KubeletConfigurationKubeReserved kubeReserved) { + this.kubeReserved = kubeReserved; + } + + public KubeletConfigurationSystemReserved getSystemReserved() { + return systemReserved; + } + + public void setSystemReserved(KubeletConfigurationSystemReserved systemReserved) { + this.systemReserved = systemReserved; + } + } + + public static class KubeletConfigurationEvictionHard extends Request { + + /** 触发Pod驱逐操作的硬性门限之内存用量: 需以Mi或Gi结尾。控制台展示为evictionHard - memory.available */ + @UCloudParam("MemoryAvailable") + private String memoryAvailable; + + /** 触发Pod驱逐操作的硬性门限之容器镜像剩余空间: 需以%结尾。控制台展示为evictionHard - imagefs.available */ + @UCloudParam("ImagefsAvailable") + private String imagefsAvailable; + + /** 触发Pod驱逐操作的硬性门限之节点存储剩余空间: 需以%结尾。控制台展示为evictionHard - nodefs.available */ + @UCloudParam("NodefsAvailable") + private String nodefsAvailable; + + /** 触发Pod驱逐操作的硬性门限节点inode剩余量: 需以%结尾。控制台展示为evictionHard - nodefs.inodesFree */ + @UCloudParam("NodefsInodesFree") + private String nodefsInodesFree; + + public String getMemoryAvailable() { + return memoryAvailable; + } + + public void setMemoryAvailable(String memoryAvailable) { + this.memoryAvailable = memoryAvailable; + } + + public String getImagefsAvailable() { + return imagefsAvailable; + } + + public void setImagefsAvailable(String imagefsAvailable) { + this.imagefsAvailable = imagefsAvailable; + } + + public String getNodefsAvailable() { + return nodefsAvailable; + } + + public void setNodefsAvailable(String nodefsAvailable) { + this.nodefsAvailable = nodefsAvailable; + } + + public String getNodefsInodesFree() { + return nodefsInodesFree; + } + + public void setNodefsInodesFree(String nodefsInodesFree) { + this.nodefsInodesFree = nodefsInodesFree; + } + } + + public static class KubeletConfigurationEvictionSoft extends Request { + + /** + * 触发Pod驱逐操作的软性门限之内存用量: + * 需以Mi或Gi结尾。配置此值时必须同时配置EvictionSoftGracePeriod.MemoryAvailable。控制台展示为evictionSoft - + * memory.available + */ + @UCloudParam("MemoryAvailable") + private String memoryAvailable; + + /** + * 触发Pod驱逐操作的软性门限之容器镜像剩余空间: + * 需以%结尾。配置此值时必须同时配置EvictionSoftGracePeriod.ImagefsAvailable。控制台展示为evictionSoft - + * imagefs.available + */ + @UCloudParam("ImagefsAvailable") + private String imagefsAvailable; + + /** + * 触发Pod驱逐操作的软性门限之节点存储剩余空间: + * 需以%结尾。配置此值时必须同时配置EvictionSoftGracePeriod.NodefsAvailable。控制台展示为evictionSoft - + * nodefs.available + */ + @UCloudParam("NodefsAvailable") + private String nodefsAvailable; + + /** + * 触发Pod驱逐操作的软性门限节点inode剩余量: + * 需以%结尾。配置此值时必须同时配置EvictionSoftGracePeriod.NodefsInodesFree。控制台展示为evictionSoft - + * nodefs.inodesFree + */ + @UCloudParam("NodefsInodesFree") + private String nodefsInodesFree; + + public String getMemoryAvailable() { + return memoryAvailable; + } + + public void setMemoryAvailable(String memoryAvailable) { + this.memoryAvailable = memoryAvailable; + } + + public String getImagefsAvailable() { + return imagefsAvailable; + } + + public void setImagefsAvailable(String imagefsAvailable) { + this.imagefsAvailable = imagefsAvailable; + } + + public String getNodefsAvailable() { + return nodefsAvailable; + } + + public void setNodefsAvailable(String nodefsAvailable) { + this.nodefsAvailable = nodefsAvailable; + } + + public String getNodefsInodesFree() { + return nodefsInodesFree; + } + + public void setNodefsInodesFree(String nodefsInodesFree) { + this.nodefsInodesFree = nodefsInodesFree; + } + } + + public static class KubeletConfigurationEvictionSoftGracePeriod extends Request { + + /** MemoryAvailable软性门限的宽限时间，必须以s结尾。控制台展示为evictionSoftGracePeriod - memory.available */ + @UCloudParam("MemoryAvailable") + private String memoryAvailable; + + /** ImagefsAvailable软性门限的宽限时间，必须以s结尾。控制台展示为evictionSoftGracePeriod - imagefs.available */ + @UCloudParam("ImagefsAvailable") + private String imagefsAvailable; + + /** NodefsAvailable软性门限的宽限时间，必须以s结尾。控制台展示为evictionSoftGracePeriod - nodefs.available */ + @UCloudParam("NodefsAvailable") + private String nodefsAvailable; + + /** NodefsInodesFree软性门限的宽限时间，必须以s结尾。控制台展示为evictionSoftGracePeriod - nodefs.inodesFree */ + @UCloudParam("NodefsInodesFree") + private String nodefsInodesFree; + + public String getMemoryAvailable() { + return memoryAvailable; + } + + public void setMemoryAvailable(String memoryAvailable) { + this.memoryAvailable = memoryAvailable; + } + + public String getImagefsAvailable() { + return imagefsAvailable; + } + + public void setImagefsAvailable(String imagefsAvailable) { + this.imagefsAvailable = imagefsAvailable; + } + + public String getNodefsAvailable() { + return nodefsAvailable; + } + + public void setNodefsAvailable(String nodefsAvailable) { + this.nodefsAvailable = nodefsAvailable; + } + + public String getNodefsInodesFree() { + return nodefsInodesFree; + } + + public void setNodefsInodesFree(String nodefsInodesFree) { + this.nodefsInodesFree = nodefsInodesFree; + } + } + + public static class KubeletConfigurationKubeReserved extends Request { + + /** kubelet预留CPU资源，以m结尾。控制台展示为kubeReserved - cpu */ + @UCloudParam("CPU") + private String cpu; + + /** kubelet预留内存资源，以Mi结尾。控制台展示为kubeReserved - memory */ + @UCloudParam("Memory") + private String memory; + + /** kubelet预留存储空间，以Gi结尾。控制台展示为kubeReserved - ephemeral-storage */ + @UCloudParam("EphemeralStorage") + private String ephemeralStorage; + + /** kubelet预留pid数量，必须大于等于500, string方式提供。控制台展示为kubeReserved - pid */ + @UCloudParam("Pid") + private String pid; + + public String getCPU() { + return cpu; + } + + public void setCPU(String cpu) { + this.cpu = cpu; + } + + public String getMemory() { + return memory; + } + + public void setMemory(String memory) { + this.memory = memory; + } + + public String getEphemeralStorage() { + return ephemeralStorage; + } + + public void setEphemeralStorage(String ephemeralStorage) { + this.ephemeralStorage = ephemeralStorage; + } + + public String getPid() { + return pid; + } + + public void setPid(String pid) { + this.pid = pid; + } + } + + public static class KubeletConfigurationSystemReserved extends Request { + + /** 系统预留CPU资源，以m结尾。控制台展示为systemReserved - cpu */ + @UCloudParam("CPU") + private String cpu; + + /** 系统预留内存资源，以Mi结尾。控制台展示为systemReserved - memory */ + @UCloudParam("Memory") + private String memory; + + /** 系统预留存储空间，以Gi结尾。控制台展示为systemReserved - ephemeral-storage */ + @UCloudParam("EphemeralStorage") + private String ephemeralStorage; + + /** 系统预留pid数量，必须大于等于500, string方式提供。控制台展示为systemReserved - pid */ + @UCloudParam("Pid") + private String pid; + + public String getCPU() { + return cpu; + } + + public void setCPU(String cpu) { + this.cpu = cpu; + } + + public String getMemory() { + return memory; + } + + public void setMemory(String memory) { + this.memory = memory; + } + + public String getEphemeralStorage() { + return ephemeralStorage; + } + + public void setEphemeralStorage(String ephemeralStorage) { + this.ephemeralStorage = ephemeralStorage; + } + + public String getPid() { + return pid; + } + + public void setPid(String pid) { + this.pid = pid; + } + } + + public static class NetworkInterface extends Request { + + /** */ + @UCloudParam("EIP") + private NetworkInterfaceEIP eip; + + public NetworkInterfaceEIP getEIP() { + return eip; + } + + public void setEIP(NetworkInterfaceEIP eip) { + this.eip = eip; + } + } + + public static class NetworkInterfaceEIP extends Request { + + /** + * 【若绑定EIP，此参数必填】弹性IP的外网带宽, 单位为Mbps. 共享带宽模式下非必传, 非共享带宽模式必须指定非0Mbps带宽. 各地域非共享带宽的带宽范围如下： + * 流量计费[1-300]，带宽计费[1-800] + */ + @UCloudParam("Bandwidth") + private Integer bandwidth; + + /** + * 弹性IP的计费模式. 枚举值: "Traffic", 流量计费; "Bandwidth", 带宽计费; "ShareBandwidth",共享带宽模式. + * "Free":免费带宽模式,默认为 "Bandwidth" + */ + @UCloudParam("PayMode") + private String payMode; + + /** 绑定的共享带宽Id，仅当PayMode为ShareBandwidth时有效 */ + @UCloudParam("ShareBandwidthId") + private String shareBandwidthId; + + /** + * 【若绑定EIP，此参数必填】弹性IP的线路。枚举值: 国际: International,BGP: Bgp. 各地域允许的线路参数如下: cn-sh1: Bgp cn-sh2: + * Bgp cn-gd: Bgp cn-bj1: Bgp cn-bj2: Bgp hk: International us-ca: International th-bkk: + * International kr-seoul:International us-ws:International ge-fra:International + * sg:International tw-kh:International.其他海外线路均为 International + */ + @UCloudParam("OperatorName") + private String operatorName; + + /** 当前EIP代金券id。请通过DescribeCoupon接口查询，或登录用户中心查看。 */ + @UCloudParam("CouponId") + private String couponId; + + public Integer getBandwidth() { + return bandwidth; + } + + public void setBandwidth(Integer bandwidth) { + this.bandwidth = bandwidth; + } + + public String getPayMode() { + return payMode; + } + + public void setPayMode(String payMode) { + this.payMode = payMode; + } + + public String getShareBandwidthId() { + return shareBandwidthId; + } + + public void setShareBandwidthId(String shareBandwidthId) { + this.shareBandwidthId = shareBandwidthId; + } + + public String getOperatorName() { + return operatorName; + } + + public void setOperatorName(String operatorName) { + this.operatorName = operatorName; + } + + public String getCouponId() { + return couponId; + } + + public void setCouponId(String couponId) { + this.couponId = couponId; + } + } + + public static class SecGroupId extends Request { + + /** 安全组 ID。至多可以同时绑定5个安全组。 */ + @UCloudParam("Id") + private String id; + + /** 安全组优先级。取值范围[1, 5] */ + @UCloudParam("Priority") + private String priority; + + /** 安全组名称。 */ + @UCloudParam("Name") + private String name; + + public String getId() { + return id; + } + + public void setId(String id) { + this.id = id; + } + + public String getPriority() { + return priority; + } + + public void setPriority(String priority) { + this.priority = priority; + } + + public String getName() { + return name; + } + + public void setName(String name) { + this.name = name; + } } } diff --git a/ucloud-sdk-java-uk8s/src/main/java/cn/ucloud/uk8s/models/UpdateUK8SNodeGroupRequest.java b/ucloud-sdk-java-uk8s/src/main/java/cn/ucloud/uk8s/models/UpdateUK8SNodeGroupRequest.java new file mode 100644 index 00000000..725e58f2 --- /dev/null +++ b/ucloud-sdk-java-uk8s/src/main/java/cn/ucloud/uk8s/models/UpdateUK8SNodeGroupRequest.java @@ -0,0 +1,617 @@ +/** + * Copyright 2021 UCloud Technology Co., Ltd. + * + *
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of the License at + * + *
http://www.apache.org/licenses/LICENSE-2.0 + * + *
Unless required by applicable law or agreed to in writing, software distributed under the
+ * License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either
+ * express or implied. See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+package cn.ucloud.uk8s.models;
+
+import cn.ucloud.common.annotation.NotEmpty;
+import cn.ucloud.common.annotation.UCloudParam;
+import cn.ucloud.common.request.Request;
+
+import java.util.List;
+
+public class UpdateUK8SNodeGroupRequest extends Request {
+
+ /** 地域。 参见 [地域和可用区列表](https://docs.ucloud.cn/api/summary/regionlist) */
+ @NotEmpty
+ @UCloudParam("Region")
+ private String region;
+
+ /** 可用区。参见 [可用区列表](https://docs.ucloud.cn/api/summary/regionlist) */
+ @UCloudParam("Zone")
+ private String zone;
+
+ /**
+ * 项目ID。不填写为默认项目，子帐号必须填写。
+ * 请参考[GetProjectList接口](https://docs.ucloud.cn/api/summary/get_project_list)
+ */
+ @UCloudParam("ProjectId")
+ private String projectId;
+
+ /** 要修改的节点池Id */
+ @NotEmpty
+ @UCloudParam("NodeGroupId")
+ private String nodeGroupId;
+
+ /** 要修改的集群ID */
+ @NotEmpty
+ @UCloudParam("ClusterId")
+ private String clusterId;
+
+ /** 节点池名字 */
+ @UCloudParam("NodeGroupName")
+ private String nodeGroupName;
+
+ /** 镜像ID */
+ @UCloudParam("ImageId")
+ private String imageId;
+
+ /** 云主机机型。枚举值["N", "C", "G", "O", "OS"]。参考[[api:uhost-api:uhost_type|云主机机型说明]]。 */
+ @UCloudParam("MachineType")
+ private String machineType;
+
+ /**
+ * 最低cpu平台，枚举值["Intel/Auto", "Intel/IvyBridge", "Intel/Haswell", "Intel/Broadwell",
+ * "Intel/Skylake", "Intel/Cascadelake"；"Intel/CascadelakeR";
+ * “Amd/Epyc2”,"Amd/Auto"],默认值是"Intel/Auto"
+ */
+ @UCloudParam("MinimalCpuPlatform")
+ private String minimalCpuPlatform;
+
+ /** 主机规格族 */
+ @UCloudParam("UHostFamily")
+ private String uHostFamily;
+
+ /** GPU卡核心数。仅GPU机型支持此字段（可选范围与MachineType+GpuType相关） */
+ @UCloudParam("CPU")
+ private Integer cpu;
+
+ /** 内存大小。单位：MB */
+ @UCloudParam("Mem")
+ private Integer mem;
+
+ /** GPU类型 */
+ @UCloudParam("GpuType")
+ private String gpuType;
+
+ /** GPU卡核心数 */
+ @UCloudParam("GPU")
+ private Integer gpu;
+
+ /** 磁盘类型 */
+ @UCloudParam("BootDiskType")
+ private String bootDiskType;
+
+ /** 数据磁盘大小 */
+ @UCloudParam("DataDiskSize")
+ private Integer dataDiskSize;
+
+ /** 磁盘类型 */
+ @UCloudParam("DataDiskType")
+ private String dataDiskType;
+
+ /** 业务组 */
+ @UCloudParam("Tag")
+ private String tag;
+
+ /** 计费模式 */
+ @UCloudParam("ChargeType")
+ private String chargeType;
+
+ /** 系统盘大小，单位GB。默认40。范围：[40, 500]。注意SSD本地盘无法调整。 */
+ @UCloudParam("BootDiskSize")
+ private Integer bootDiskSize;
+
+ /** 子网 ID。默认为集群创建时填写的子网ID，也可以填写集群同VPC内的子网ID。 */
+ @UCloudParam("SubnetId")
+ private String subnetId;
+
+ /** 重复 待删除 可用区。参见 [可用区列表](https://docs.ucloud.cn/api/summary/regionlist) */
+ @UCloudParam("ZoneBaned")
+ private String zoneBaned;
+
+ /** 硬件隔离组id。可通过DescribeIsolationGroup获取。 */
+ @UCloudParam("IsolationGroupId")
+ private String isolationGroupId;
+
+ /** 默认110，生产环境建议小于等于110。 */
+ @UCloudParam("MaxPods")
+ private String maxPods;
+
+ /** 用户自定义数据。当镜像支持Cloud-init Feature时可填写此字段。注意：1、总数据量大小不超过 16K；2、使用base64编码。 */
+ @UCloudParam("UserData")
+ private String userData;
+
+ /** 用户自定义Shell脚本。与UserData的区别在于InitScript在节点初始化完毕后才执行，UserData则是云主机初始化时执行。 */
+ @UCloudParam("InitScript")
+ private String initScript;
+
+ /** Node节点污点，形式为key=value:effect，多组taints用”,“隔开,最多支持五组。 */
+ @UCloudParam("Taints")
+ private String taints;
+
+ /** Node节点标签。key=value形式,多组用”,“隔开，最多5组。 如env=pro,type=game */
+ @UCloudParam("Labels")
+ private String labels;
+
+ /**
+ * 网络增强特性。枚举值：Normal，不开启; Super，开启网络增强1.0； Ultra，开启网络增强2.0；Extreme，开启网络增强3.0; Infiniband,
+ * 开启网络增强4.0（详情参考主机官网文档）
+ */
+ @UCloudParam("NetCapability")
+ private String netCapability;
+
+ /** 弹性网卡特性。开启了弹性网卡权限位，此特性才生效，默认 false 未开启，true 开启。 */
+ @UCloudParam("UNIFeature")
+ private Boolean uniFeature;
+
+ /** 主机安全模式。Firewall：防火墙；SecGroup：安全组；默认值：Firewall。 */
+ @UCloudParam("SecurityMode")
+ private String securityMode;
+
+ /** 自定义主机名前缀。完整的自定义主机名为{NodeNamePrefix}-{NodeIP}。 */
+ @UCloudParam("NodeNamePrefix")
+ private String nodeNamePrefix;
+
+ /** */
+ @UCloudParam("SecGroupId")
+ private List Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software distributed under the
+ * License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either
+ * express or implied. See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+package cn.ucloud.uk8s.models;
+
+
+import cn.ucloud.common.response.Response;
+
+import com.google.gson.annotations.SerializedName;
+
+public class UpdateUK8SNodeGroupResponse extends Response {
+
+ /** 节点池ID */
+ @SerializedName("NodeGroupId")
+ private String nodeGroupId;
+
+ public String getNodeGroupId() {
+ return nodeGroupId;
+ }
+
+ public void setNodeGroupId(String nodeGroupId) {
+ this.nodeGroupId = nodeGroupId;
+ }
+}
diff --git a/ucloud-sdk-java-ukafka/pom.xml b/ucloud-sdk-java-ukafka/pom.xml
index 132b466c..6d798afa 100644
--- a/ucloud-sdk-java-ukafka/pom.xml
+++ b/ucloud-sdk-java-ukafka/pom.xml
@@ -5,19 +5,19 @@